Submission of a manuscript implies: that the work described has not been published before; that it is not under consideration for publication anywhere else; that its publication has been approved by all co-authors, if any, as well as by the responsible authorities – tacitly or explicitly – at the institute where the work has been carried out. The publisher will not be held legally responsible should there be any claims for compensation.
Authors should submit their manuscripts online. Electronic submission substantially reduces the editorial processing and reviewing times and shortens overall publication times. Please follow the hyperlink “Submit online” on the right and upload all of your manuscript files following the instructions given on the screen.
The following information should be included for online submission:
Please contact Editor before you would like to submit your proposal for a special issue. When submitting your proposal for a special issue, please include the following information:
For permission to reproduce material elsewhere, please contact firstname.lastname@example.org
As such there is no limit to the length of regular articles. Article should include all possible technical details including tables, figures, notes and references.
Single-blind peer review. This journal follows a single-blind reviewing procedure. Author (s) should also consider Indian reputed Journal(s) reference(s) there in the article text, if any relevant to the work. The first page of the article include these information, title, all author’s name, affiliations, email and contact information of the corresponding author. Any acknowledgements, disclosures, or funding information should also be included at the end of the text of a manuscript.
The title page should include:
Manuscripts should include a max. 500 words abstract. It should be informative and not only indicate the general scope of the article but also state which new information given, the conclusions and results. As the abstract is not part of the text it should be complete in itself. If reference is required in abstract then use this form [S. Kumar, J. Today’s Ideas - Tomorrow’s Technol. Vol.4, p-58, (2015)], do not use the roman number.
Please provide 3-5 keywords for indexing purposes.
Manuscripts should be submitted preferably in Word/PDF format, Use a normal, plain font (e.g., 10-point Times Roman) for text. Use italics for emphasis. Use the automatic page numbering function to number the pages. Do not use field functions. Use tab stops or other commands for indents, not the space bar. Use the table function, not spreadsheets, to make tables. Use the equation editor or Math Type for equations. Save your file in doc format (Word 2007 or higher). The body of the article should be divided into sections with the use of section headings and subheadings.
Make it sure that equations, tabular material, figures, and references are following a sequential numerical scheme in the paper.
Please use no more than three levels of displayed headings. Use heading styles as mentioned below;
Abbreviations should be defined at first mention and used consistently thereafter.
Footnotes can be used to give additional information, which may include the citation of a reference included in the reference list. They should not consist solely of a reference citation, and they should never include the bibliographic details of a reference. They should also not contain any figures or tables.
Footnotes to the text are numbered consecutively; those to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data). Footnotes to the title or the authors of the article are not given reference symbols.
Always use footnotes instead of endnotes.
Acknowledgments of people, grants, funds, etc. should be placed in this section before the reference list and at the end of the text of a manuscript. The names of funding organizations/society should be written in full. Dedications are not allowed. A principal heading [level (1)] is used for this section, but this section should not be numbered.
Cite references in the text by Roman numbers like , [2-4] and/or [6-7, 9-11]. Example: as mentioned in earlier sentence  you have to include the reference. If for a particular point or information you need to quote two three references then you can use in this way [2-4]. Further, to quote the references that are not in sequence then you can use the way [2-4, 6-8].
b. Reference List
The list of references should include works that are cited in the text that have been published, accepted for publication, communicated or to be submitted. Personal communications and unpublished works, and thesis can also be included in the Reference list. Do not use footnotes or endnotes as a substitute for a reference list.
c. Article from Journal
d. Article by DOI
g. Online Document
All tables must be numbered using roman numerals. Tables should always be cited in text in consecutive numeral order. For each table, please supply a table caption (title) explaining the components of the table. Identify any previously published material by giving the original source in the form of a reference at the end of the table caption. Footnotes to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data) and included beneath the table body.
For the best quality final product, it is highly recommended that you submit all of your artwork – photographs, line drawings, etc. – in an electronic format. Your art will then be produced to the highest standards with the greatest accuracy to detail. The published work will directly reflect the quality of the artwork provided. Supply all figures electronically. Name your figure files with “Fig” and the figure number, e.g., Fig1.eps.
To add lettering, it is best to use Arial (sans serif fonts). Keep lettering consistently sized throughout your final-sized artwork, usually about 2–3 mm (8–12 pt). Variance of type size within an illustration should be minimal, e.g., do not use 8-pt type on an axis and 20-pt type for the axis label. Avoid effects such as shading, outline letters, etc. Do not include titles or captions within your illustrations.
All figures are to be numbered using roman numerals. Figures should always be cited in text in consecutive numerical order. Figure parts should be denoted by lowercase letters (a, b, c, etc.). If an appendix appears in your article and it contains one or more figures, continue the consecutive numbering of the main text. Do not number the appendix figures, “A1, A2, A3, etc.” Figures in online appendices (Electronic Supplementary Material) should, however, be numbered separately.
Each figure should have a concise caption describing accurately what the figure depicts. Include the captions in the text file of the manuscript, not in the figure file. Figure captions begin with the term Fig. in bold type, followed by the figure number, also in bold type. No punctuation is to be included after the number, nor is any punctuation to be placed at the end of the caption. Identify all elements found in the figure in the figure caption; and use boxes, circles, etc., as coordinate points in graphs. Identify previously published material by giving the original source in the form of a reference citation at the end of the figure caption.
If you include figures that have already been published elsewhere you must obtain permission from the copyright owner(s) for both the print and online format. Please be aware that some publishers do not grant electronic rights for free and that Chitkara University Publication will not be able to refund any costs that may have occurred to receive these permissions. In such cases, material from other open & free sources should be used.
In order to give people of all abilities and disabilities access to the content of your figures, please make sure that all figures have descriptive.
SSubmit all material in standard file formats.
Submit your material in *.doc or *.PDF format. A collection of figures may also be combined in a *.OPJ, *.PDF, *.EPS file format.
Upon acceptance of article author will receive Copyright Transfer Form. Once the Author Application has been completed, then article will be processed and author will receive the proofs. Authors will be asked to grant copyright of the article to the Chitkara University Publications for exclusive publication and dissemination rights. This will ensure the widest possible protection and dissemination of information under copyright laws, the article publish under the Creative Commons Attribution License.
Offprints can be ordered by the corresponding author.
Publication of color illustrations is free of charge.
The purpose of the proof is to check for typesetting or conversion errors and the completeness and accuracy of the text, tables and figures. Substantial changes in content, e.g., new results, corrected values, title and authorship, are not allowed without the approval of the Editor.
After online publication, further changes can only be made in the form of an Erratum, which will be hyperlinked to the article, except to addition name of the author (s).
The article will be published online after receipt of the corrected proofs. This is the official first publication citable with the DOI. After release of the printed version, the paper can also be cited by issue and page numbers.
The Research Paper(s) and all communication must be in English language only.
Published article(s) reference of J. Today’s Ideas - Tomorrow’s Technol. in other manuscript(s) for citation should be use in this format;
S. Kumar, A. Kumar, J.Kumar, J. Today’s Ideas - Tomorrow’s Technol. Vol.3, p165,(2015).
[Name of the author with initials, name of journal in italic(J. Today’s Ideas - Tomorrow’s Technol.), volume bold, page number and the year of publication]